Language:


Configuring Mail - Admin Client

This page describes changing to Admin Client mode, This can be necessary when configuring Standard ERP to send and receive external mail (email).

---

If you will configure the Mail system from a client machine and you will be using the Internal Gateway, you will need to configure the Gateway Settings setting. This requires you to change to "Admin Client" mode after you have logged in. To do this, go to the Technics module using the [Switch Module] button in the Navigation Centre and open the Program Mode register. Choose 'Admin Client' from the Operations menu (with 'cog' icon, Windows/Mac OS X) or Tools menu (with 'wrench' icon, iOS/Android). If you are not in "Admin Client" mode, any work you do in this setting will be saved on your client machine and not on the server. Once you have completed the set-up work, leave "Admin Client" mode by returning to the Program Mode register and choosing 'Normal Client' from the Operations or Tools menu.

If 'Technics' is not available in the list that appears when you click or tap the [Switch Module] button, the probable reason is that you have logged on as a Person that does not have access privileges for this module. If you are the system administrator, your Person record should belong to an Access Group that Starts from Full Access and explicitly grants full access to the Technics module:

If your Person record belongs to such an Access Group, you will be able to enter the Technics Module on a client machine in order to change to "Admin Client" mode.

Similarly, if you are unable to enter "Admin Client" mode, this may be because you have logged in as a Person that does not have access to it. This is again controlled using Access Groups (by controlling access to the 'Admin Client' Action).

Please follow these links for full descriptions of Persons and Access Groups.

---

Configuring Mail in Standard ERP:

Go back to: