The Sales Order Register and the Stock Locations Value Pack
The Stock Locations Value Pack adds one field to the 'Del. Terms' card of the Sales Order screen:
- Location
- Paste Special
Location register, Stock module
- Used as default in Deliveries
- If the stock that will be used to satisfy this Order is to be taken from a particular Location, specify that Location here. Otherwise, stock from all Locations will be available.
- If you have specified a Main Location in the Stock Settings setting, leaving this field blank means that stock will be taken from the Main Location. Note, however, that the Require Location option in the same setting has no power over this field. If you are using this option, you will not have to enter a Location here, but you will have to specify one in any Deliveries resulting from this Order.
- If the 'Item Status' window is on screen, the quantities shown will only refer to the Location specified here. If this shows that there is insufficient stock in the Location to fulfil the Order, use the Stock Movement register to move any stock that might exist elsewhere into the Location.
