If you are working on a client machine, some settings (E-Mail Aliases, E-Mail POP3 Servers and Gateways) require you to change to "Admin Client" mode after you have logged in. To do this, go to the Technics module using the Modules menu and open the Program Mode register. Choose 'Admin Client' from the Operations menu. If you are not in "Admin Client" mode, any work you do in these three settings will be saved on your client machine and not on the server. Once you have completed the setup work, leave "Admin Client" mode by returning to the Program Mode register and choosing 'Normal Client' from the Operations menu.

If 'Technics' is not available on the Modules menu, the probable reason is that you have logged on as a Person that does not have access privileges for this module. If you are the system administrator, it is recommended that your Person record should belong to an Access Group that Starts from Full Access and explicitly grants full access to the Technics module:

If your Person record belongs to such an Access Group, you will be able to enter the Technics Module on a client machine in order to change to "Admin Client" mode.

Similarly, if you are unable to enter "Admin Client" mode, this may be because you have logged in as a Person that does not have access to it. This is controlled using Access Groups (by controlling access to the 'Admin Client' Action).

Please click for full descriptions of Persons and Access Groups.

Anterior Siguiente Arriba Capítulo Completo en versión p/Impresión