HansaManuals Home   >> Standard ERP   >> Order   >> Register Order  

Föregående   Nästa               Skriv ut hela kapitlet               Sök  

Detta avser program version 5.2  

Operations Menu - Create Delivery

To issue a Delivery from a Sales Order, select 'Create Delivery' from the Operations menu. For the function to have any effect, you must first save all changes to the Sales Order (use the [Save] button).

A new record will be created in the Delivery register (in the Stock module), and opened in a new window, entitled 'Delivery: Inspect'. This means that it has been created and saved and is being opened for amendment and approval.

The Delivery record takes its information from the Order, and tries to ship as many Items on the Order as possible. The stock Location specified on flip F of the Order row or on the 'Del Terms' card of the Order will be copied to flip B of the Delivery row or to the Delivery header respectively. For Stocked Items, the stock balance in this Location will be shown in the Avail. field in the grid, and the default quantity in the Del. Qty field will usually be the maximum shippable quantity in the Location. If the Delivery does not have a Location, the Avail. and Del. Qty figures will be calculated using the stock balances from every Location. If you change to another Location, the Avail. and Del. Qty figures will be updated immediately. If you would like the default Del. Qty always to be the ordered quantity not the maximum shippable quantity, even if there is insufficient stock, use the Always Deliver option in the Stock Settings setting in the Stock module. Plain Items are shipped without any checking of stock levels, but will not appear on the Delivery at all if you are using the Automatic Delivery for Service and Plain Items option in the Stock Settings setting.

If you have used an Item that requires Serial Numbers at the Unit level in the Order with a Quantity greater than one, the Delivery will contain the appropriate number of rows each with a Quantity of one. This allows you to enter Serial Numbers on flip B. You must enter Serial Numbers before you can approve the Delivery. In the case of an Item requiring Serial Numbers at the Batch level, the Delivery will only contain a single row with the quantity copied from the Sales Order. You can enter a single Serial/Batch Number, providing you have a sufficient quantity in stock with that Serial Number. If this is not the case, you will be told there is insufficient stock when you try to save the Delivery. You can then use the 'Split Row' Operations menu function to divide the row into two, and then enter a second Serial Number in the new row. The 'Split Row' function will ensure that both Delivery rows remain connected to the originating Sales Order row, so the Delivered Quantities in that row will be correct. Usually, no default Serial Numbers will be offered, so you will need to enter them yourself. There is no automatic FIFO allocation. However, in the case of Items that use batch numbers, Serial Numbers will be brought in automatically if you are using the Automatically set Batch Serial Number on Delivery option in the Stock Settings setting. If the Delivery is not approved immediately, there is a risk that the batch Serial Numbers will be delivered to another Customer in the mean time, so you can update these batch Serial Numbers using the 'Refill Batch No. Items' function on the Operations menu.

If you need to make a part shipment, change the Delivery Quantity in the appropriate Delivery rows. You can also remove entire rows, by clicking on the row number to the left and pressing the Backspace key. HansaWorld Enterprise will prevent you delivering a greater Quantity than was ordered unless you are using the Allow Del Qty Greater than Ordered option in the Stock Settings setting. For Stocked Items, you can also prevent delivering more than you have in stock by using the Do Not Allow Over Delivery option in the same setting.

If you have already made a part shipment, when the time comes to ship the remainder of the Order, HansaWorld Enterprise will again attempt to ship as many of the remaining Items on the Order as possible. The default quantity on the second Delivery will be the same, irrespective of whether the first Delivery has been approved.

The Date of the Delivery can default to the current date or to the Planned Delivery Date of the Order, depending on which Delivery Date Based On option has been selected on the 'Delivery' card of the Contact record for the Customer. You can change the default Delivery Date if necessary.

To print Freight Labels, use the function on the Operations menu. To print a Picking List, click the Printer icon. To print a Delivery Note, approve the Delivery (see next paragraph), click the [Save] button and then click the Printer icon. Alternatively, go into the Stock module and use the 'Documents' function on the File menu or the [Documents] button in the Master Control panel.

When the Delivery is complete, click the OK check box and save. This signifies that the Delivery has been approved. If you have determined that cost accounting transactions are to be created at the point of delivery, stock transactions in the Nominal Ledger will now be raised (they may otherwise be raised after invoicing). You will no longer be able to modify the Delivery. You will not be able to raise an Invoice for the Delivery until it has been approved.

Please click here for a full description of the Delivery screen, including detailed information about shipments, stock, approving Deliveries and Nominal Ledger Transactions.

To close the screen and return to the Order, click the close box. You will be asked if you want to save any changes. The Del 1 and Del 2 fields of the Order (visible on flip D) will be updated automatically (you will need to close the Order and re-open it to see this). You will no longer be able to delete the Order.

If you run the 'Create Delivery' function from the Operations menu of the 'Orders: Browse' window, it will only create a Delivery for the first highlighted Order. If you need to create Deliveries in batches, use the 'Create Deliveries from Orders' Maintenance function. You can also create a Delivery by dragging an Order from the 'Orders: Browse' window to the 'Deliveries: Browse' window. In this case, the new Delivery will not be opened automatically for checking and approval.

The Order and the Delivery will remain connected to each other through the Attachments facility. This allows you to open the Order quickly and easily when reviewing the Delivery, or to open the Delivery from the Order. When viewing the Delivery or Order, click the button with the paper clip image to open a list of attachments. Then double-click an item in this list to open it.

If the function does not create a Delivery, the probable causes are:

1. The Order has been marked as Closed.
   

2. All Items on the Order have already been delivered.
   

3. The Customer has exceeded their Credit Limit, and you have specified in the Credit Limit setting in the Sales Ledger that Deliveries should not be created for such Customers. In this case, a message will appear explaining the situation.
   

4. The Customer is on hold (the 'On Hold' box on the 'Terms' card of their Contact record has been checked).
   

5. You have logged in as a user that is not permitted to create Deliveries from Orders. This is controlled using Access Groups. To do this, deny access to the 'Delivery from Order' and/or 'Disallow Delivery from not OKed Order' Actions as appropriate.
   

6. There is no valid record in the Number Series - Deliveries setting (in the Stock module). This might be a fault in the setting itself, or it might be because the default Delivery Number on the 'Serial Nos' card of the current user's Person record or in the Number Series Defaults setting (in the System module) is not in a valid Number Series. This problem will usually occur at the beginning of a new year. If a change is made to the 'Serial Nos' card of the Person record, you will need to quit HansaWorld Enterprise and restart for it to take effect.

Föregående   Nästa   Start            Skriv ut hela kapitlet