HansaManuals Home   >> Standard ERP   >> Production   >> Production Operation Register  

Previous   Next               Entire Chapter in Printable Form               Search  

This text refers to program version 8.5  

Row Menu - Production Operation - Quality Control

This page describes the 'Quality Control' function on the Row menu in the Production Operation record window. If you are using iOS or Android, the 'Quality Control' function is on the Tools menu (with 'wrench' icon).

---

The 'Quality Control' function will be useful in cases where the assembled Item produced by the Production Operation is one that should be subject to a quality control cycle. For example, the Item might be perishable.

To use this function, first place the insertion point in a row containing an assembled Item (which must be Serial Numbered at unit or batch level) Then open the Row menu by right-clicking (Windows) or Ctrl-clicking (macOS) the row number. When the Row menu opens, select 'Quality Control'. If you are using iOS or Android, select 'Quality Control' from the Tools menu (with 'wrench' icon). A new record will be created in the Batch Quality Control setting in the Service Orders module:

The new Batch Quality Control record will be opened in a window entitled 'Batch Quality Control: New'. This means that it has not yet been saved. The Item Number, Serial Number and Comment will be taken from the Production Operation row, the Analyse Date will be the current date, and your Signature as the current user will be placed in the Tested By field. The Production Operation Number will also be copied to the Batch Quality Control record. If you have configured a Batch Quality Control Template for the Item containing a list of the Tests that should be carried out to ensure the Item meets quality standards, it will appear in the Template field and the Tests will be listed in the matrix. Save the record to bring the Item into the quality control cycle.

If the function does not create a Batch Quality Control record when expected, the probable causes are:

1. You did not place the insertion point in a Production Operation row before selecting the function.
   

2. The row containing the insertion point does not have an Out Qty.
   

3. The Item in the row containing the insertion point is not Serial Numbered at unit or batch level.

Please refer here for more details about the Batch Quality Control setting.

---

The Production Operation register in Standard ERP:

• Introduction
  

• Entering a Production Operation
  

• Inspecting and Finishing Production Operations
  

• Nominal Ledger Transactions from Production Operations
  

• Operations menu
  

• Create menu
  

• Row menu, including:
  
  • Quality Control

See also:

• Assembly in Stages
  

• Additional Production Costs with Production Operations
  

• Sub-Assemblies with Production Operations (Phantom Items)

• Materials, Standard Operations and Routings settings

Go back to:

• Home page for Production manual
  

• Home page for Standard ERP manual

Previous   Next   Top            Entire Chapter in Printable Form